**Please note: The below is provided as general direction. Refer to your window manufacturer’s manual for precise instructions.
Homeowners all around the province are rushing to get their spring cleaning list finished before the gorgeous weather arrives. This could be a summer to remember, and nobody wants to be stuck at home doing chores. That means it’s time to grab your bucket, a trusty microfiber cloth or rag, some soap and water, and your favourite window cleaning product because it’s time to get the most out of your view by cleaning those dirty windows.
Cleaning the windows themselves is a pretty straightforward task, but what about taking them apart for cleaning? In order to do a thorough job and give them the cleaning they deserve after a long winter season, taking them apart is a must – especially in situations where accessing your windows from the outside is difficult or simply out of the question. Here’s how to remove your windows for cleaning this spring cleaning season.
**How to remove vertical and horizontal sliding windows for cleaning
**Removing your sliding window can help with giving it a thorough cleaning so you can enjoy the view all summer long. Worry not, because it’s much easier than it sounds – simply follow these steps to remove your sliding windows:
Vertical sliding windows:
- Check for screws in the side rails or rubber material in the top track of your window – these security measures are sometimes installed to prevent windows from being opened.
- Unlock the window.
- Lift clips on the interior of your window.
- Lift the window until you hear a click.
- Push left on the window and pull right to remove it for cleaning.
- Reinsert the same way you took the window out, inserting it on the left and then on the right, sliding it back down into place, pushing down the interior clips, and activating the locks.
Watch this video for a quick demonstration.
Horizontal sliding windows:
- Unlock the window.
- Slide the window past the plastic stopper – this stop prevents the window from being removed.
- Once past the stopper, simply lift the window up and out from the bottom to remove it for cleaning.
- Reinsert the window the same way you removed it – make sure that you’re reinserting it past the stopper. Push it top-first into the track, then insert the bottom. Slide the window closed and activate the locks.
Watch this video for a quick demonstration.
When removing your sliding windows, it’s important that you remember to clean out the tracks of the window. This can be done with a microfiber cloth or even with a vacuum, and ensures that any dust, dirt or debris is removed from the window track, allowing the window to perform as intended.
**How to remove and reinsert double-hung windows for cleaning
**Double-hung windows feature two sashes (top and bottom) which can be operated independently. Removing double-hung windows for cleaning is quite similar to removing horizontal and vertical sliding windows. Following these steps will allow you to remove your double-hung windows quickly and efficiently for effective cleaning:
- Unlock the mechanism between the two sashes.
- First, slide the bottom sash a few inches towards the top of the window. Once slid up a few inches, squeeze both the tilt latch buttons at the top of the sash until they click.
- Rotate the sash towards you until it’s perpendicular – from there, lift one side up a few inches, and then the other to remove the bottom sash for cleaning.
- To remove the upper sash, slide it down towards where the bottom sash normally sits.
- Press both tilt latch buttons on the top of the upper sash until they click, rotate the sash towards you until it’s perpendicular to the wall, and remove it the same way you removed the bottom sash.
- Once both sashes have been removed, make sure the pivot bars aren’t connected to the balance shoes.
- To reinsert your double-hung windows, start with the upper sash. Hold it perpendicular to the wall, placing one pivot bar into the outer balance shoe and then the other. When fully seated in the balance shoes, rotate the sash upwards and push it all the way to the top of the window.
- Reinsert the bottom sash by following these same steps – hold it perpendicular to the wall, placing one pivot bar in the inner balance shoe and then the other. Rotate the bottom sash back into place, pushing it into the frame. Close the bottom sash and lock the window to ensure proper operation.
Watch this video for a quick demonstration.
Voila! You’re now able to remove both vertical and horizontal sliding windows and double-hung windows, allowing you to deep clean them for the summer season ahead. Before you know it, you’ll have the cleanest windows on the block and your home will be the envy of all your neighbours.
While you’re cleaning your windows, remember to make sure that they’re operating as intended. If you notice anything that requires attention or which could impair the operation of your windows, you can trust the experienced team at Muskoka Window & Door Centre for any and all maintenance, repairs, and window replacement. Our team is well-versed in every aspect of window maintenance and installation, and our showroom features the highest quality products and accessories found in the Muskoka region. To find out more about the services offered by Muskoka Window & Door Centre, get in touch with us today!